EXCP 0200 Fault Code

SMRECZAK

Member
S
Join Date
Jan 2012
Location
Elmwood Park, IL
Posts
13
I have problem with network card 1756-ENET/A it is giving me fault code EXCP0200, ones a week?
After I unplug and plugin back card works fine for next few days.
There is no info on Allen-Bradley website.
Any explanation for that issue?
Crush Data included in attachments.
Thank you.
 

Similar Topics

P
Allen Bradley 1756-ENBT EXCP 0300 issue
Hi, I experience a recurrent problem on 1756-ENBT Allen Bradley network adapter. The module goes to failure with the following error code: EXCP...
Replies
8
Views
7,089
philippe.amalfitano
P
U
HSBY M580 Remote NOM0200 INPUT_BYTE Failing
Our system utilises INPUT_BYTE to capture NMEA0183 ASCII stream which sends data to the NOM multiple times a second. The NOM module can either be...
Replies
0
Views
386
Unipir81
U
E
BMXNOM0200 Link failing
We are using a Schneider BMXNOM0200 with an RS-485 loop with four devices daisy chained. If one device is powered down, we lose communication to...
Replies
5
Views
2,021
Lare
L
M
Lenze EPL 10200
Anybody have any ideas as to what sort of hardware is needed to access a Lenze EPL 10200 PLC? And, what is a good software package for accessing...
Replies
2
Views
2,872
Mad_Poet
M
A
Schneider M340 With NOR0200 For telemetry using DNP3 and IEC 104 Protocol
I have 3 year experience in Schneider System,But i dont have any experience in RTU systems.For my new project we are using Schneider M340 with...
Replies
0
Views
3,583
arun_K
A
Back
Top Bottom