I currently have a 1756-IF16 analog input module configured for differential mode. I have the module wired and configured for current inputs. Is it possible to mix current (4-20 ma) and voltage (0-10 v) inputs on the same module? Thanks in advance for your help.
1756-IF16 Analog Card
- Thread starter BENNY
- Start date
Similar Topics
Hello,
we chose Allen-Bradley analog card 1756-IF16 for three 4-20mA current inputs for XFMR high side winding temp, low side winding temp and...
Good Evening ,
I’m getting ready to integrate a Mettler Toledo IND 570 into a ControlLogix PLC , Analog 4-20 ma input card 1756-IF16 . I’m...
Good Evening ,
I have a 1756-IF16 Analog Input card already installed in a working ControlLogix Rack. I need to add another Analog 4-20 ma...
Hello PLCTalk Friends,
I am interested in connecting one 2-wire loop powered 4-20mA transmitter to two analog input cards. In my program, I will...
Is there a way to see what the actual field signal value is going into each channel of the Analog Input I/O card 1756-IF16?
In other words, I...