TEOWK
Member
Hi,Good day.
I am studying the communication between PLC and RS485 in Temperature Controller. I would like to view process temperature and set temperature by using touch screen HMI.
However, is the protocol a main concern in this case. If let say, the RS485 in temperature controller is MODBUS or DEVICE NET, then is it true that RS 485 in PLC must also have these same protocol?
Thank you.
I am studying the communication between PLC and RS485 in Temperature Controller. I would like to view process temperature and set temperature by using touch screen HMI.
However, is the protocol a main concern in this case. If let say, the RS485 in temperature controller is MODBUS or DEVICE NET, then is it true that RS 485 in PLC must also have these same protocol?
Thank you.