S7200 with citect

teh

Supporting Member
T
Join Date
Nov 2002
Posts
140
Should i need additional software like softnet to communicated via serial port with Citect HMI if i using s7 200. ( i know that for s7 300 we need softnet ! ).


how is the cable connection ? just a PPI convertor?


Regards
 

Similar Topics

S
S7200 comms to Citect
Hi guys, I have a client with a siemens S7200 PLC (1215C CPU),which has an on board ethernet port (marked "profinet" on the PLC) and I need to...
Replies
1
Views
1,534
sigmadelta
S
R
Regarding Siemens s7200 and vijeo citect
I am trying to Configure Siemens S7200 (cpu222) with Vijeo citect scada on PPI cable but the problem i face in vijeo citect is that i am not able...
Replies
0
Views
4,310
rohitmane
R
M
S7200 CPU222 to Citect V6.0 LAN Network
Dear All, I successfully tested S7200 CPU222 and Citect V6.0. The PC is connected to the LAN network and I want the two other Client PC to...
Replies
4
Views
2,252
zankorel
Z
A
AKD BS7200 software
Hi there! I know this is playing in archeologist, but I need to tune a bit some older Kollmorgen/AKD Digifas 7100 servo drive. Any chance of...
Replies
3
Views
1,138
autobus
A
A
Plc siemens s7200
hey guys here first time for me in this awesome forum actually i have S7-200 connected to Winview HMI and HMI project file has lost and broken...
Replies
0
Views
600
Affrian
A
Back
Top Bottom