replace S7 316-2DP By 317-2DP
- Thread starter deandutch
- Start date
RMA
Member
I wouldn't expect to have any trouble with the swap. Unlike the 318 which is sort of 400 in camouflage, the 317 is still a genuine 300 series CPU. It's just got more of everything. It's going from a 318 to a 317 where you've got to watch out.
I'll have a look at the details of any differences when I'm back at work tomorrow and if there are any significant differences (negative OR positive) I'll post them.
I'll have a look at the details of any differences when I'm back at work tomorrow and if there are any significant differences (negative OR positive) I'll post them.
Rich Parkhurst
Member
317-2DP
It will be a pretty seamless swap, but when ordering don't forget to buy the micro memory card. I don't belive the 316 required one. The MMC is used instead of a battery for program backup among other things.
It will be a pretty seamless swap, but when ordering don't forget to buy the micro memory card. I don't belive the 316 required one. The MMC is used instead of a battery for program backup among other things.
Similar Topics
We have a Beckhoff CP6201 PC and an EK1100 module communicating with it via EtherCAT in one of our machines.
Due to problems with the PC, I want...
Panelview 2711-K5A8. Customer has 6 of these in service connected to SLC 504’s. One has a bad backlight and I need a solution to replace it...
I’ve got some devices that are triggered by shorting pins to common. There is 24 volts on each pin and right now I am using a relay output card...
I can't replace cpu S400 416-3XR05-0AB0 BY 416-3ER05-0AB0 in PCS7 Project
when using replace object to keep the original configuration in the...
How can I achieve the same functionality in Studio 5000?
Image 001.png for the old RSLogix500 program
Image 002.png for conversion to Studio...