Data uplink

Pierre

Lifetime Supporting Member
Pierre
Join Date
Apr 2002
Location
Montreal
Posts
1,669
What would be the most economical way to push Data from many sites (600+) to one.

Specially if there is no phone lines available.

GlobalStar uplink only?
Cell phone + Web?

We need about 1 minute of uplink per day.
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
134
bkottaras
B
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
65
Plantationpark
P
P
Migrating Proficy Historian data to a new server (essentials edition)
Has anyone migrated Proficy Historian data to a new server? I followed the guide to move all the data over, but when I run the utility, it stops...
Replies
0
Views
49
phuz
P
U
SLC500 analog input value data type for EZ Series HMI
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Replies
10
Views
258
OkiePC
OkiePC
U
Data logging in PLC or HMI
Hi, Wy we log data in PLC using DLG instruction, when we have option to log data in HMI
Replies
1
Views
80
JesperMP
JesperMP
Back
Top Bottom