S7-200 communication with WinCC

vaughan

Guest
V
Hi I'd like to know how to connect a Siemens s7-200 PLC to WinCC v6, without an Ethernet module. I've got the PPI cable, as well as a CP5611 (PROFIBUS/MPI) card and cable.
 
PC Access....

PC Access supports all the connectivity options as supported by Microwin. You can use it with a cable and a 5611 cards.

about $300 but only works with the 200.
 

Similar Topics

N
S7-1200 PLC communication with WINCC RUNTIME SCADA professional
Hi all, i am using s7-1200 (CPU 1214 DC/DC/DC) & wincc runtime SCADA v12(professional)[General PC] & this kind of project , I am handling for...
Replies
2
Views
3,738
nilesh_1106
N
F
WinCC and S7-200 communication
I have 3 s7-200 plc exchanging data through their ports.One PLC has EM277 to communicate to CP5611 and show all data in WinCC using PC access. Now...
Replies
0
Views
1,825
falgunvasava
F
L
WinCC Flexible Runtime SCADA Communication with 8 or more s7 200 plc
Hello all, I want to Control & Monitor 8 different S7-200 CPU 226 PLCs through Wincc Flexible SCADA. I am trying to communicate through...
Replies
3
Views
7,038
recycled_mind
R
R
S7 200 224 communication with WinCC 6.0
Hi, I want to setup communication between S7200 (CPU 224) with WinCC 6.0 SP2 using the onboard port of the CPU. 1. Is this possible? 2. Do I...
Replies
3
Views
5,676
Amr Hassan
A
A
Siemens S7200 communication with Wincc
I am using S7 200 PLC in my system which is communicating with WIncc via EM277 module data in the wincc is not rententive as wincc is switch from...
Replies
1
Views
6,871
Amjad19376
A
Back
Top Bottom