Wireless communications with a PLC 5

mdfoust

Member
M
Join Date
Jun 2005
Posts
4
Wireless communications with a PLC 5: Does anyone know the format of data transmissions with omnex radios? I am successfully retrieving analog data transmissions from the integer files, but can't find, or get, the digital data from the bit files.

Any help is appreciated.
Thanks, mdfoust
 

Similar Topics

B
Wireless Communications between 2 PLC's
Hi Everyone, Helping out a friend out here and need some opinions. 2) AB PLC's separated by about 5 miles line of site. They are used for...
Replies
9
Views
2,758
gclshortt
gclshortt
S
DH+ Communications over Wireless Link?
We have an existing DH+ network that includes a PLC on a moveable transfer car. The DH+ connection to the transfer car is via a Wampfler overhead...
Replies
2
Views
3,103
plc noob
P
Sliver
Anyone have experience with Leaky feeder antenna on wireless communications?
Hi, I have recently installed wireless modems to replaced hardwired control to mobile equipment. The wireless radio use 2.4Ghz and ethernet...
Replies
7
Views
4,537
mordred
mordred
G
SLC500 Wireless communications
I've got a SLC500 on my floor that my guys have to physically go to and download data for reports from. Reports are taken at a specific time each...
2
Replies
15
Views
5,729
gregjwilson
G
S
wireless communications
I work as a programmer does anyone know of a product I can plug into my ethernet port on my PLC and have it communicate to my wireles hub in my...
Replies
3
Views
2,928
BigAl
B
Back
Top Bottom