Omron CQM1H
- Thread starter baz
- Start date
panic mode
Member
you don't...
just install the card on the end of the plc and use next four input channels as analog inputs.
just install the card on the end of the plc and use next four input channels as analog inputs.
Similar Topics
Hi Everyone,
I have a customer that needs a CQM1H (CPU51) replaced. They purchased the processor new-old-stock from a source they found online...
I have an Omron CQM1H-CPU21 and a NS8-TV00B-V1, I have followed the manufacturer's spec on how to set this up and all I got is the HMI is trying...
Hello maybe someone can help me, I have omron CQM1H PLC with CLK21 (Controller link module) and SCB41 (Serial module connected with NMB CSD-891B...
Hi,
I have an Omron PLC (CQM1H-61CPU) connected to an Omron HMI (NT631C).
In order to connect a PC to them, I want to know:
1- Is the cable...
Hello,
i have a omron plc with cqm1h cpu, and is protected by um read password
i need any program to crack it lik xtal, plc backup tool v6 with...