network Q

fotoking

Member
F
Join Date
Aug 2005
Location
toronto
Posts
1
anybody can tell me if a PLC program running a network (devicenet or control), can I add some I/O just by adding to a digital I/O as it is not there?
 

Similar Topics

A
Network switch recommendations
Hello, I have a A.B Compact logix communicating with two fanuc robots via ethernet. The plc also communicates to an automation direct hmi screen...
Replies
14
Views
477
drbitboy
drbitboy
M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
8
Views
297
BeepBob
B
mad4x4
Network Switch supplier USA
Looking for a supplier of Layer 3 Network Switches DIN RAIL MOUNT, in Alabama, In the UK we would use Typically in the UK we would use...
Replies
6
Views
232
joseph_e2
J
mad4x4
Scalance Ring NEtwork
We are having an issue with some servers, with "Teamed NICs" is we plug one cable leg of the team into one switch and the other to another...
Replies
0
Views
79
mad4x4
mad4x4
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2 3
Replies
32
Views
987
Rsflipflop256
Rsflipflop256
Back
Top Bottom