sk mahadeva
Member
we a microcontrooler based bagging unit of obsolete design. we wish to replace with siemens make PLC(s7 200) for weighing sugar. the existing loadcell range is 14 mv for 0 kg and 28 mv for 100 kg.please reply
plc based bagging machine100 kg
- Thread starter sk mahadeva
- Start date
you will need a converter for the loadcell to make it a normal plc signal. Is it not somewhere hidden in the machine?
and you will need a controller of any type to see this analog signal and to stop the valve. Or use a complete new PLC for it. however i think siemns is too expensive for this try a small one like plc micro or a wago if needed more assisance just send mail to me.
[email protected]
and you will need a controller of any type to see this analog signal and to stop the valve. Or use a complete new PLC for it. however i think siemns is too expensive for this try a small one like plc micro or a wago if needed more assisance just send mail to me.
[email protected]
Similar Topics
I am trying to use tag based alarms in Studio 5000. It seems really great at making alarms automatic. I have a few alarms that require...
I got a problem concerning the change of coins from a vending machine plc based, i use the rs logic starter lite with Rs emulate 500 along with...
Dear Members,
I am new to S5 series PLC, In one of my application, I need to communicate S5 6ES5942-7UA12/ or S5 6ES5941-7UA12 PLC with HMI(PC...
How can I get a rough estimate of how much memory I will need for a controller if the code is not written yet, but I know how much I/O it will be...
Greeting,
I am doing some investigations on which driver(s) support tag based addressing (eg. Pump001_Running) rather than DB or Modbus based...