Network terms

SCAN.PLC

Member
S
Join Date
Oct 2005
Location
scotland
Posts
53
Hi EveryBody,

I am confused with some of the terms used in industrial networking.
i want to have a clear understanding of

I/O server
OPC Server
OPC remtoe Server
OPC linkx

also i would like to know how the clients are connected to server for data and how the clinets on two different netwroks be connceted to get the data from server.

i hope your explantion on this will be with a network diagrams.


scan.plc
 

Similar Topics

A
Network switch recommendations
Hello, I have a A.B Compact logix communicating with two fanuc robots via ethernet. The plc also communicates to an automation direct hmi screen...
Replies
14
Views
467
drbitboy
drbitboy
M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
8
Views
294
BeepBob
B
mad4x4
Network Switch supplier USA
Looking for a supplier of Layer 3 Network Switches DIN RAIL MOUNT, in Alabama, In the UK we would use Typically in the UK we would use...
Replies
6
Views
231
joseph_e2
J
mad4x4
Scalance Ring NEtwork
We are having an issue with some servers, with "Teamed NICs" is we plug one cable leg of the team into one switch and the other to another...
Replies
0
Views
77
mad4x4
mad4x4
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2 3
Replies
32
Views
978
Rsflipflop256
Rsflipflop256
Back
Top Bottom