avegaartuz
Member
We need a complete list of voltages and waveform for ROBICON SCR Controller Series 448 for test porpuses. This system have two boards the GTU and the COL.
Thank You for your help.
Thank You for your help.
Robicon SCR Controller 448
- Thread starter avegaartuz
- Start date
Similar Topics
I have a Robicon 454GT series drive, and am noticing some weird behavior. It was configured to use analog input 1 (4-20ma corresponding to...
Hello. Can anyone please tell me about automating robicon drives via step7 with profibus communication? I want to know if there are:
1)...
Hi Guys,
I have a Robicon drive which I need to hook to an S7-300 via profibus. I have the tool to set the program etc and the comms parameters...
I am using a DL260 to control 2 Robicon VFD's. I have a H2-ECOM100 going to a switch going to each Sixnet EtherTrak in the VFD. They are talking...
Have an 800HP Robicon CSI drive (ID CSI 456980.00 fyi).. and when the drive runs at/above 44Hz I get over voltage faults. I've looked at the clamp...