Hi,
I want to setup communication between S7200 (CPU 224) with WinCC 6.0 SP2 using the onboard port of the CPU.
1. Is this possible?
2. Do I need an OPC or some other software to do this?
I can ofcourse do this by adding a profibus card or ethernet card.
thanks,
Rahul
I want to setup communication between S7200 (CPU 224) with WinCC 6.0 SP2 using the onboard port of the CPU.
1. Is this possible?
2. Do I need an OPC or some other software to do this?
I can ofcourse do this by adding a profibus card or ethernet card.
thanks,
Rahul