This is a strange problem.I add a new page to the application in the panelview1000e.All of the objects in the new page were copy from the other old page with control.But the new application can not work.When I run the new application,the panelview1000e display the message"CNet## : Remote station has not replied within specified timeout period."I am sure the cable is OK.The old application also can run without any problem now.How can I amend the application?Wait for your help.Thanks in advance.
Strange Problem about Panelview1000e
- Thread starter libinhu
- Start date
Similar Topics
We have an OPC server getting data from a Compactlogix PLC. The PLC also communicates with a Panelview and a couple VFDs via Ethernet/IP...
I had a customer call about a machine counter not working. We checked hardware, determined the input was correctly functioning. In tracing...
Hi Friends,
I have a strange situation at hand. I wrote a Logic for Tank Over fill (5 Tanks). When Level switch senses level, it triggers Alarm...
I have 3 identical CompactLogix L33ER's running in a factory and have always sent out automatic emails successfully. However, our company now has...
Hi guys,
So I added a routine in a L71, and as is my nature, I selected all of the rungs and pasted them into Notepad++ and then re-imported them...
