ascoldasice
Member
Hey,
I'm currently working on the assembly and programming of an automated reaction vessel. For this vessel I am using an excisting brabender Loss-in-weight feeder with congrav S cotroller. this is used for dosing the Desmodur 15 powder i need.
My problem is the next:
I'm using a CPU313C 2DP PLC from siemens with a CP341 module with MODBUS driver. I learned some S7 programming at school but I have no idea on how to begin on this problem.
i need to be able to change the setpoint in the congrav s module, start and stop the weighing through the MODBUS interface.
here is all the information I have:
the weigher:
http://www.brabender-technologie.com/mainpage/werknorm/english/h32ddsre.pdf
the congrav S module:
http://www.brabender-technologie.com/mainpage/werknorm/english/con_s_e.pdf
the congrav S telegram description:
http://aao.ultis.net/MODBUS/
could anyone plz help me? and give me and example program or explain it to me clearly...
tnx
Ascoldasice
I'm currently working on the assembly and programming of an automated reaction vessel. For this vessel I am using an excisting brabender Loss-in-weight feeder with congrav S cotroller. this is used for dosing the Desmodur 15 powder i need.
My problem is the next:
I'm using a CPU313C 2DP PLC from siemens with a CP341 module with MODBUS driver. I learned some S7 programming at school but I have no idea on how to begin on this problem.
i need to be able to change the setpoint in the congrav s module, start and stop the weighing through the MODBUS interface.
here is all the information I have:
the weigher:
http://www.brabender-technologie.com/mainpage/werknorm/english/h32ddsre.pdf
the congrav S module:
http://www.brabender-technologie.com/mainpage/werknorm/english/con_s_e.pdf
the congrav S telegram description:
http://aao.ultis.net/MODBUS/
could anyone plz help me? and give me and example program or explain it to me clearly...
tnx
Ascoldasice
