analog out

dave dompkosky

Guest
D
I need to control a 0-24 vdc particle clutch using an analog out on a slc500 0-10vdc. Anyone have any ideas.
 
You could use a proportional controlled solid state relay that has control voltage of 0-10 vdc. You would just need to find one that has a output in your range. You could start by looking at Crydom.
 

Similar Topics

D
Analog I/O Module (suggestion)
Good afternoon, I am currently working with an HMI/PLC LP-a070 and I require at least one analog output, but the PLC does not have one. I was...
Replies
5
Views
115
Data_name
D
dalporto
Analog Faceplates - Rockwell L8X vs InTouch Standalone
Hi all. Customer wants analog faceplates really bad, even if we explained that it doesn't make much sense in his process. What he wants to see...
Replies
5
Views
129
dalporto
dalporto
K
Input Analog Jittering
I'm having trouble calming down 2 Tempo Sonics. I'm using Studio 5000 CompactLogix my Raw value is jumping around from 8575.0 to 8755.0 at a...
2 3
Replies
30
Views
1,140
Peter Nachtwey
Peter Nachtwey
U
SLC500 analog input value data type for EZ Series HMI
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Replies
10
Views
258
OkiePC
OkiePC
K
How to add Analog Input into Ignition Designer
Hi, I have questions. I have Analog Input that need to put into Ignition Designer. But I don't know how to put?
Replies
1
Views
119
Old Man
O
Back
Top Bottom