S7-200 tip45

blokl

Member

B

Join Date

Aug 2006

Location

Berkel

Posts

11

• Aug 28, 2006

• #1

Has anybody tried TIP45 from siemens?
It is written for an 214 but I need it for an 266 and I'm wondering of this works.

Thx.

 

adfox

Member

Join Date

Jun 2006

Location

Poland

Posts

334

• Aug 28, 2006

• #2

Can You be more specific ? Most things that i wrote for s7-200 214 worked on 224 and 226 but please post more info on subject.

 

Leonardo

Member

L

Join Date

Jun 2002

Posts

56

• Aug 28, 2006

• #3

If the program works with an 224 CPU, It should also work with an 226 CPU.
I suggest to try, and see the result!

 

adfox

Member

Join Date

Jun 2006

Location

Poland

Posts

334

• Aug 28, 2006

• #4

The best way to check if a plc supports specific instruction from microwin's istruction list is to open that list and look for a function. If function has red X on it - it means that it's not supported, change the cpu type in project properties and look again.

Hope this helps.

 

blokl

Member

OP

B

Join Date

Aug 2006

Location

Berkel

Posts

11

• Aug 29, 2006

• #5

Thx for the reply.
I won't get any data vissible and the teller stay's on 13
I will post the tip on the following link
http://blokl.nl/~lblok/plc/tip45b.doc

Thx.