Panel View 550

ggchavhan

Member
G
Join Date
Nov 2006
Location
pune
Posts
135
HI

I am having PanelView 550, with DH 485 port, But I don't have AIC converter Can it be possible to download the program the program by using RS485 t0 RS 232 converter, and after downloading DH485 of PV550 to SLC500. Please help me
 
It would help if we knew the complete part number of your PanelView 550 also your SLC500. And if your programming terminal ( laptop, desktop ) has a real serial port.
 

Similar Topics

Storms-Engineering
Panel View 550 thinks it has DH+ but doesn't
Hello all, I have a Panelview 550 Cat 2711-K5A5 that has one Serial port ( RS-232). Which I can talk to via my cable via DF1. Which is weird...
Replies
13
Views
2,427
Storms-Engineering
Storms-Engineering
0
Comunication Panel View 550 to MIcrologix 1400
Good evening partners, ist my first question on forum, i hope receive any answer. I need make a cable DH485 for communicate an Panel View 550...
Replies
3
Views
2,910
Mickey
Mickey
W
Panel View 550
Hello, I have a panel View 550 that went bad , a new one has been installed , when you power up the PV it looks as it did before except there are...
Replies
6
Views
1,754
wvmoto115
W
K
SLC 5/04 communication issues with panel view 550
Panel view CAT number 2711-K5A2 Getting fault "612 No active mode found on network" Not sure if connected correctly and channel configuration is...
Replies
8
Views
2,020
geniusintraining
geniusintraining
F
Panel View 550
Hi All - I know that this has been covered off previously but I can't find the right solution. I have a: PanelView 550 2711-T5A2L1X 4.41 Connected...
Replies
5
Views
2,770
Mickey
Mickey
Back
Top Bottom