sunkist Member S Join Date Mar 2003 Posts 1 Mar 14, 2003 #1 i need to design the PLC ladder diagram for 4-ways traffic light control. the timing for the lights are: R= red light for 30 seconds O= orange light for 2 seconds G= green lights for 28 seconds
i need to design the PLC ladder diagram for 4-ways traffic light control. the timing for the lights are: R= red light for 30 seconds O= orange light for 2 seconds G= green lights for 28 seconds
Terry Woods Member T Join Date Apr 2002 Posts 3,170 Mar 14, 2003 #2 There is much constructive help available... Do a search at this site for "Traffic"
Goody Member Join Date Apr 2002 Location Huddersfield W Yorks UK Posts 1,081 Mar 14, 2003 #3 If you can get to use CX Programmer for omron PLC's, That exact traffic light sequence comes with it as an example program.
If you can get to use CX Programmer for omron PLC's, That exact traffic light sequence comes with it as an example program.
RDay Member Join Date Apr 2002 Location Evansville, Indiana. Posts 143 Mar 14, 2003 #4 And so it begins again.
Bill Simpson Lifetime Supporting Member B Join Date Apr 2002 Location Whitby, Ontario Posts 85 Mar 14, 2003 #5 An Introduction to employing either cascading timers, or comparison instructions for solving this age old control problem is available at: http://www.thelearningpit.com/lp/doc/index.html
An Introduction to employing either cascading timers, or comparison instructions for solving this age old control problem is available at: http://www.thelearningpit.com/lp/doc/index.html