Dear All,
I am facing the following errors when i try to download the program to 140CPU43412A.
"Controller type does not match the PLC type set in configuration database"
Software Used: Concept 2.2 SR 2 (Service Pack 2)
Hardware Used: 140CPU43412A
Communication through RS232 Modbus Port 1
PLC Front panel switch positions:
1. Key Switch : Start
2. Slide Switch : RTU
I observed that when i try to download the configuration, this "Configuration" option is DISABLED
Please help me out to sortout this problem.
Thanks
Atif
I am facing the following errors when i try to download the program to 140CPU43412A.
"Controller type does not match the PLC type set in configuration database"
Software Used: Concept 2.2 SR 2 (Service Pack 2)
Hardware Used: 140CPU43412A
Communication through RS232 Modbus Port 1
PLC Front panel switch positions:
1. Key Switch : Start
2. Slide Switch : RTU
I observed that when i try to download the configuration, this "Configuration" option is DISABLED
Please help me out to sortout this problem.
Thanks
Atif