I'm Using Proficy 5.5
Quickpanel View IC754VSL12CTD=FE
Configured IP = 10.0.192.6
Host Notebook
IP= 10.0.192.1
Networked though a switch and it pings in both directions.
When I try to download the project from Proficy into the CE unit, I get the following error:
Error 6103: Target does not match model and it directs me to the IP address in the inspector window. The IP matches and I’m set up for model # QP View 12” TFT (IC754VxL12Cxx). There’s nothing for me to change, so I seem to have no options.
I would appreciate any suggestions on installing a project on this device.
I really miss being able to use Quickpanel software with the old download cable. GE has succeeded in making a panel that ONLY I can restore / replace and at the moment I’m not sure I can.
Quickpanel View IC754VSL12CTD=FE
Configured IP = 10.0.192.6
Host Notebook
IP= 10.0.192.1
Networked though a switch and it pings in both directions.
When I try to download the project from Proficy into the CE unit, I get the following error:
Error 6103: Target does not match model and it directs me to the IP address in the inspector window. The IP matches and I’m set up for model # QP View 12” TFT (IC754VxL12Cxx). There’s nothing for me to change, so I seem to have no options.
I would appreciate any suggestions on installing a project on this device.
I really miss being able to use Quickpanel software with the old download cable. GE has succeeded in making a panel that ONLY I can restore / replace and at the moment I’m not sure I can.