hi
im using shneider micro plc in one of my project.With this im using TSXSCP114 communication card on rs485.with cp114 im using rs485 to 323 converter. with the 232 port im connecting a sixnet modem.
when im connecting my modbus simulator with converter's 323 port than it s working.but when im dialing my modem than at that time connection is being established but i cannt read any info in scada nor i see any sending activity my modem.
can any one help me regarding this >>..is it cable problem configuration or some thng else
im using shneider micro plc in one of my project.With this im using TSXSCP114 communication card on rs485.with cp114 im using rs485 to 323 converter. with the 232 port im connecting a sixnet modem.
when im connecting my modbus simulator with converter's 323 port than it s working.but when im dialing my modem than at that time connection is being established but i cannt read any info in scada nor i see any sending activity my modem.
can any one help me regarding this >>..is it cable problem configuration or some thng else