Hi,
I'm trying to upload/download from a Panelview 900 which is connected to an SLC5/04 via RS232(DH485). The SLC is on a DH+ network which also contains a Control Logix 5663 acting as a gateway (via an ethernet) to the Engineering Station.
After reading some archive threads, I now have the following hw/sw config.
PV900 - cat 2711-K9A5 - FW 4.20
SLC - 5/04 OS401 Ser.A - Proc Ser.B
CLogix - 5663 - FW 10.32
DHRIO/C - FW 4.01
ENET - Rev 1.4
RSLinx - Ver 2.40.01 build 16
Browsing with RSLinx, I can drill down as far as the DH485 channel on the SLC but only see the SLC on this network, the Panelview node is 'not found'.
I have a feeling the problem might be related to the passthru link IDs but am not sure.
any ideas?
I'm trying to upload/download from a Panelview 900 which is connected to an SLC5/04 via RS232(DH485). The SLC is on a DH+ network which also contains a Control Logix 5663 acting as a gateway (via an ethernet) to the Engineering Station.
After reading some archive threads, I now have the following hw/sw config.
PV900 - cat 2711-K9A5 - FW 4.20
SLC - 5/04 OS401 Ser.A - Proc Ser.B
CLogix - 5663 - FW 10.32
DHRIO/C - FW 4.01
ENET - Rev 1.4
RSLinx - Ver 2.40.01 build 16
Browsing with RSLinx, I can drill down as far as the DH485 channel on the SLC but only see the SLC on this network, the Panelview node is 'not found'.
I have a feeling the problem might be related to the passthru link IDs but am not sure.
any ideas?