prasadtoke
Member
i have some S5 plcs with cpus like 922 and 928b ineed a cheap HMI which will connect to it to show some trends and alarms 5.7 inches will do.I would prefer not to use Siemens HMI
hmi for s5
- Thread starter prasadtoke
- Start date
curlyandshemp
Lifetime Supporting Member
prasadtoke said:
I believe Red Lion have the G series that have the AS511 interface.
http://www.redlion.net/Products/HumanMachineInterface/OperatorInterface/G306.html
Ian
DanYost
Member
Ian is correct, you could use a G306, which has an AS511 driver.
Regards,
Dan
Regards,
Dan
Similar Topics
I am using Factory Talk view Machine Edition Runtime HMI. I want to configure on button in such way that when i press this button I want to...
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics show not only blower...
Hello All,
I've been tasked with automating a flatbed press that runs with some pretty extreme temperatures. I've been told it can run close to...