I'm running Modsoft V2.5 program software for a Modicon - Quantum Processor.
Segment Status Display:
Seg Networks
1 1-300
2 1-100
3 1-100
(I've got 300 networks in Segment 1 and 100 networks in each Segment 2 & 3)
I need to put a CHS command/block in Segment 1, Network 1 by itself with no other networks in segment 1.
-- What is the best way to do this?
-- Can I copy multiple networks from one segment to another?
(copy the 300 networks for Seg_1 to Seg_2)
-- Can I copy/paste or rename Segments?
(Rename segment 1 to segment 2 and insert/add a segment for my one rung of logic).
Any help would be greatly appreciated.
Thanks,
Brian
Segment Status Display:
Seg Networks
1 1-300
2 1-100
3 1-100
(I've got 300 networks in Segment 1 and 100 networks in each Segment 2 & 3)
I need to put a CHS command/block in Segment 1, Network 1 by itself with no other networks in segment 1.
-- What is the best way to do this?
-- Can I copy multiple networks from one segment to another?
(copy the 300 networks for Seg_1 to Seg_2)
-- Can I copy/paste or rename Segments?
(Rename segment 1 to segment 2 and insert/add a segment for my one rung of logic).
Any help would be greatly appreciated.
Thanks,
Brian