Redundancy setup

shanmu_gam

Member
S
Join Date
Mar 2007
Location
*******
Posts
22
Hi There,

Can anybody help me to do the redundancy setup in AB L61 CPU.It would be helpful to me if u send me any documents regarding this test.

Shanmugam
 

Similar Topics

T
FactoryTalk view SE Redundancy Setup issues
This post is both a question (at the end), and maybe assist others with same issues. The detail on setting up FactoryTalk View SE V13 redundant...
Replies
0
Views
1,342
thefatcontroller
T
M
ControlLogix redundancy setup
This might be pushing the limit of what to ask for, but some guidance in the right direction would be helpful. I'm programming this setup in...
Replies
2
Views
4,214
Ken Roach
Ken Roach
Lord Farquaad
Stratix redundancy setup?
I have a network with a Stratix8300 switch and a bunch of Stratix5700 switches, all connected via fiber in a ring topology. If this was a Siemens...
Replies
7
Views
6,641
Phil Buchanan
Phil Buchanan
C
1756-RM/A redundancy setup
Hi all, I was setting up a system using 1756-L61 processor, 1756-CNBR/E and a 1756-RM/A. As i know 1756-RM/A is a plug and play, but when it...
Replies
2
Views
4,767
Ken Roach
Ken Roach
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
84
Ken Moore
Ken Moore
Back
Top Bottom