An Engineer on the site that I am currently working at has told me that Seimens-TI505 IO can be used as remote I/O by Rockwell's Control Logix PLC's. Anyone out there know if this is the case ? I told him that I thought it highly unlikely but what the heck stranger things have happened at sea..
Seimens TI as Remote IO for Rockwell
- Thread starter consys
- Start date
JRW
Member
Add a profibus master module to Control Logix and put an RBC module to the TI505 rack (take out the CPU) and it should work.
Is there standard DI/DO in the TI?
Is there standard DI/DO in the TI?
Ken Roach
Lifetime Supporting Member + Moderator
That's how I've done it: Use a Woodhead/SST Profibus Master module in the ControlLogix chassis and the Siemens 505 Profibus RBC (now only available as the 2500-RBC from CTI) in the 505 chassis.
Similar Topics
opening up a copy of my HMI program I can go to where the passwords are created but they are all asterisks. How can I view what is there? I see...
I have installed ver 16 of tia portal and I am running in the 21 days grace period. My question is this, is it fully functional during that 21...
Hi;
In our corrugator plant, there are one Corrugator and five Flexo graphic printing machines. One of them is a BOBST brand French made...
We have these in our shuttles. The IP Address is stored on the SD card for the unit. We had a card go bad and I am trying to copy another card...
Good morning, experts!
I have a Siemens PLC and IO that I need to cross to Rockwell, and I have zero experience with the Siemens line of products...