I am wanting to know if a Belden CDT Datatwist FIVE 1624R (4 twisted pair shielded) will work as a communication cable for CC-link between QJ61BT11N to AJ65SBTB1-32D I/O.
Im getting the flashing ERR light on the QJ which is: A communication error station identified, or remote station No. duplicated.
I have my master set as station 0 and the I/O set to station 1.
Baud rate is set at 156 kbps and test cable is only 3ft long. I have went through and setup the cc-link parameters as the manual told me to do and says there are no errors when checked. Any help would be greatly appreciated.
Im getting the flashing ERR light on the QJ which is: A communication error station identified, or remote station No. duplicated.
I have my master set as station 0 and the I/O set to station 1.
Baud rate is set at 156 kbps and test cable is only 3ft long. I have went through and setup the cc-link parameters as the manual told me to do and says there are no errors when checked. Any help would be greatly appreciated.