ABB 07CR41 PLC Backup with AC31GRAF

riyajahamad

Member

R

Join Date

Jun 2002

Location

Pune-India

Posts

133

• Jan 27, 2008

• #1

Dear Experts,
One of my client want me to take backup of ABB 07CR41 PLC.
I never worked on ABB, but having command on Siemens, Allenbradly, Mitsubishi, Messung PLC's programming.
I got AC31GRAF software but I don't understand how to go ahead, I read software manual but I am not clear.
It will be helpfull if someone guide me.
Thanks in advance.
Riyaz

 

macs_plc

Member

M

Join Date

Jan 2008

Location

Nagercoil

Posts

120

• Jan 27, 2008

• #2

Did u tried uploading the project from the PLC......????
is it worked ???

 

riyajahamad

Member

OP

R

Join Date

Jun 2002

Location

Pune-India

Posts

133

• Jan 27, 2008

• #3

Thanks macs_plc for reply.

Are you worked on these PLC's/software? It will be highly appreciated if you give your cell number.

I am not uploading project from PLC, making preparation as Company where is PLC is far away, I am planning to go their, with well prepared.

It will helpful if some one tell me about cable required.

Is it simple serial cable or required some special one?

Thanks in advance.

Riyaz.

 

macs_plc

Member

M

Join Date

Jan 2008

Location

Nagercoil

Posts

120

• Jan 28, 2008

• #4

CAble required is rs232 if u r using a microplc...it depends upon the plc types......

Otherwise u can use AC1131 software -- it is for the same 07cr41 type PLC more advanced and user friendly than AC31graf...anyway its up to u

Try working on that ac31graf sofware using any simulation driver...
so it will b usefull while ur client
My Mobile No. is 0091 97894 27977...

 

Last edited: Jan 28, 2008

macs_plc

Member

M

Join Date

Jan 2008

Location

Nagercoil

Posts

120

• Jan 28, 2008

• #5

Do u have any simulation drivers ???

 

riyajahamad

Member

OP

R

Join Date

Jun 2002

Location

Pune-India

Posts

133

• Feb 5, 2008

• #6

Hi macs,
Thanks for support.
I don't have simulation driver, can you mail me same.
Thanks in advance.
Riyaz

 

vijayaram

Member

V

Join Date

May 2008

Location

*******

Posts

4

• May 8, 2008

• #7

you can upload the backup using AC31GRAF software in CR41 but it will come only in statement text. open the AC31GRAF software and click options - upload application, give a name and select central unit as 40 series. it will take 5 minutes to upload.
use 07SK50 cable to communicate.

 

[email protected]

Member

S

Join Date

Aug 2013

Location

delhi

Posts

1

• Aug 31, 2013

• #8

kindly reply..

Dear Experts,
One of my client want me to take backup of ABB 07CR41 PLC.
I never worked on ABB, but having command on Siemens, Allenbradly, Mitsubishi, Messung PLC's programming.
I got AC31GRAF software but I don't understand how to go ahead, I read software manual but I am not clear.
It will be helpfull if someone guide me.
Thanks in advance.
sasmita[/quote]