TechnoSoft Motion Control

abwiz

Member
abwiz
Join Date
Nov 2005
Location
PA
Posts
196
Has anyone used Technosoft for any motion control applications?

I was looking at their website. They seem like they have a pretty powerful motion controller that can work with a variety of different motor configurations.

Any suggestions or comments on this?
 

Similar Topics

O
Micromotion 1700 Configuration
I've been fighting with a Micromotion 1700. Can't get into the configuration area. It's as if the optical sensors are disabled or locked out...
Replies
1
Views
72
tdoa
T
M
Sending data from Simotion Control unit (C230-2, C240-2 and D435-2) to Microsoft Azure
Hello everybody, I'm currently working on a project where I need to implement an IoT platform based on Microsoft Azure Cloud. Communication is...
Replies
3
Views
127
MatijaV
M
R
SoMachine Motion Service 4.3
Hello Everybody Anybody knows where I can get this version of SoMachine? The new machine expert version won't open my project saying there is a...
Replies
0
Views
79
RodrigoPLC
R
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
113
mk42
M
C
Módulo Motion FX5-40SSC-S
Bom dia, Estou com uma máquina parada algum tempo, meu servo funciona em modo manual, porém não funciona em automático. Meu equipamento e...
Replies
0
Views
80
CapaceteJR
C
Back
Top Bottom