How to map controllogix data type to PLC5(SLC500)

wilsonzhu

Member
W
Join Date
Jan 2008
Location
vancouver
Posts
278
HI, Controllogix has some tag data type and it can be mapped to PLC5, how does these map work. For example, Float in CLX to what type in PLC5.Can anyone can give me a list or some documents. Thanks a lot.
 

Similar Topics

W
modbus registers map to controllogix data type
Hi all, When programming modbus communication, we need to map the registers to AB Controllogix Data type. Is the following Modbus registers...
Replies
5
Views
8,234
wilsonzhu
W
D
Neuron XT Air compressor Modbus Map
I Am looking to get ahold of the modbus map for an air compressor. I HAve emailed the vendor as well, just wondering if any of my friends here...
Replies
1
Views
117
DwSoFt
D
A
Keyence IV2 and IV3 Ethernet I/O Map
I was looking for this because I did not have the EDS file for the camera. I also just like to know what all the bits do sometimes. If you want to...
Replies
0
Views
938
ASuperJohn
A
R
How to Map to an SD Card in a Productivity PLC
Hey guys, I am using the logging function of the Productivity PLC (P-550) to log 64 tags into a CSV file. I can access these files using the...
Replies
10
Views
4,356
widelto
widelto
D
ethernet I/O map
Hi, I use a 1768-L43S CompactLogix5343S Controller to connect with Rexroth with Air Weld Gun. the problem is when I use this controller to program...
Replies
14
Views
2,175
daniel yang
D
Back
Top Bottom