Actwin
- Thread starter gh_ounie
- Start date
markdyk
Member
R = Register (You can use it as flags)
DIF = on positive transition 1 scan high
e.g.
if a and b, y0100 will be one scan high
DFN = no clue, butt it maybe an inverted DIF, butt i'm not sure
DIF = on positive transition 1 scan high
e.g.
--|a|--|b|--|DIF1|--(Y0100)-
if a and b, y0100 will be one scan high
DFN = no clue, butt it maybe an inverted DIF, butt i'm not sure
Similar Topics
I've uploaded a raw program from an old Hitachi EC-40HARP that is to be replaced by something else. I have to do some reverse engineering as the...
I need key for actwin software please to program hitachi plc eh 150
I am using ActWin H vers.3.70 on a Hitachi EH-150 PLC. Does anyone know a trick to adding comments to the program? The manual says to just click...
Hello,
Is there any PID Block that i can use in Actwin PID for Hitachi EH150 PLC for EH-CPU308A??
I also found the following function format...
can anyone help me with a key for actwin v 3.70c for one time use for hitachi EH MICRO PLC WOULD GREATLY APPRECIATE IT ALSO SEEMS THAT ge fANUC...