xbtn 401 cable
- Thread starter mo_eng
- Start date
I have no experience with this particular PLC, but these two links should get you going.
The cable wiring diagram should be in here:
http://www.alamedaelectric.com/Modicon%20Documents/OIT%20Magelis%20Software%20Training%20Manual.pdf
And it might take a mod to the cable to got it working>
http://modbus.control.com/thread/1026238694
The cable wiring diagram should be in here:
http://www.alamedaelectric.com/Modicon%20Documents/OIT%20Magelis%20Software%20Training%20Manual.pdf
And it might take a mod to the cable to got it working>
http://modbus.control.com/thread/1026238694
Similar Topics
hi all
how can i find the firmware v4.2 for xbtn-400?
i have to start a sequence with XBTN-400(2). FOR DO IT
I have a bit instruction (%MW10:X10) and apply that in parallel with in my plc...
HI all
I want to monitor Pressure in a liquid line. I use a presere transmitter (4-20ma)And scale that in the hardware configuration.(0-350psi)...
Hi Gurus,
I am usin Magelis for monitoring/ Controlling a process.
Monitoring the inputs/outputs was easy,..converted them to %MW and used...
Hi everybody how are you today?
I have problem with UNI4401 VFD.
Once I turned On 480VAC input power to L1-L2-L3, there is unbalance output...