I am new to Siemens programming. I am trying to work with some encoder values and I am unsure about Siemens addressing. I pretty much get the I/O, but some of the counter and position addressing is alluding me. Any help is appreciated.
Siemens Addressing help
- Thread starter kbradray
- Start date
PeterW
Member
They are in the periphery ranges, PIW and PQW.
Similar Topics
Hi all
I need a bit of help with the program below.
I have a thumwheel switch and I want to transfer the left hand three digits to a dat wod...
Hi,
How to define Siemens(S7-300 via MPI) plc tags in weintek HMI Mt8102?
I know Communication is established but i am not defining addresses...
Hi,
How to define Siemens(S7-300 via MPI) plc tags in weintek HMI Mt8102?
Communication is established but i am not defining addresses correctly...
Hi All,
In Siemens S7 Classic, if I want to find the location of a physical input corresponding to a peripheral address, (say PIW488), how would...
Hello guys,
This works:
L P#DBX 30.0
LAR2
But I need "DBX 30.0" to be input parameter to the function.
I made pTag variable with data type...