redundancy CPU and supervisor

baidimed

Member
B
Join Date
Jul 2008
Location
ariana
Posts
23
Hi
it is possible to make plant that we used a redundancy CPU and redundancy supervidor in a same time
i used the tow CPU 315-2dp and tow pc equipped with wincc
 

Similar Topics

L
PCS 7 410E REDUNDANCY CPU with Comfort panel TP900
410E with TP900 different IP range I have a PCS 7 410E REDUNDANCY CPU connected to the TP900 panel, from CPU side the X8 port address is...
Replies
0
Views
956
liyao1017
L
M
SIEMENS CPU S7-412-3H External Fault & Redundancy Fault
Dear All We have SIEMENS PLC S7-412-3H redundant system having remote I/O modules connected with Profibus. During commissioning when we Power up...
Replies
0
Views
2,305
main_zia
M
D
redundancy in s7-400 using cpu 412-5H
how is redundancy accomplished using the above configuration? If the outputs are taken from both modules,wont they get added up?how does error...
Replies
4
Views
3,369
seppoalanen
seppoalanen
S
CPU Redundancy
Hi all again. We are planning a project where they ask for a redundancy option. That is to say, they want it now, and maybe in the future to use...
Replies
2
Views
2,216
sapoleon
S
G
CPU redundancy with two CPU412-2DP and one ET200L
How do I do This???? We are into PLC training and intend to show CPU Redundancy on Siemens S7 412 2DP cpu's. I have following Hardware (a)...
Replies
4
Views
8,808
ggchavhan
G
Back
Top Bottom