patman
Member
We recently replaced a Siemens 505 with RSLogix 5000. Our boiler is controlled by CD600 Smar for pid loops. They are still being used for the control. I need some guidance on how to decipher the Smar loops to RS pid instructions. 
SMAR CD600 PID to RS5000 PID
- Thread starter patman
- Start date
Similar Topics
Hey guys,
I've a pilot plant that are controlled with Smar instruments with Fieldbus standard. I'm going to control the plant by S7-300 (PID...
We have a Contrologix plc with Foundation Fieldbus instruments and a CN2FF linking device with Smar I/FB transmitters which are working very well...
We have enough Hart transmitters to warrant getting Siemens' PDM software to configure and keep track of xmtr configurations. PDM uses a Hart...
Can I use PanelView 550T with PLC SMAR LC700. I suggest usign modbus, but how really connect it. I mean do I need addition modul on PLC or just...
I am working on a large migration of the standard PID instruction to the PlantPAx P_PIDE. Has anyone done a migration like this before and have a...