I am working in a caster.There was a punching machine to mark slab.Its controller was S5 115u.This siemens plc was getting marking id from abb plc Mp200/1.Mp200/1 has communication processor 180f which supports siemens 3964 protocol.Now this siemens plcs5115u has been upgraded to s7 300.I am not getting data(marking id) at siemens plc end.
communication between abbplc and siemens plc
- Thread starter Sahoo116
- Start date
504bloke
Lifetime Supporting Member
Did it ever work after the upgrade ?
Similar Topics
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Or there is an alternative to this? I suppose there are many but I've only seen put/get
Can you for example set up a new plc and connect it to an...
