roy357
Member
hi all
I have a slc 5/04 with a eeprom fitted on it, when I performance a power up of the machine I need to modify some parameters on the Panel View but when i turn off the machine and power up again those parameters have been changed and i have to introduce the params again I thing the problem is that the eprom is loading its program at the power up of the machine so I need to know how to store the modifications in the eeprom i order to eliminate the necesity of modify the parameters each time a power loss ocurrs. I dont know How to "Burn" the eeptom I will appreciate your help
.
thank you
Roy
I have a slc 5/04 with a eeprom fitted on it, when I performance a power up of the machine I need to modify some parameters on the Panel View but when i turn off the machine and power up again those parameters have been changed and i have to introduce the params again I thing the problem is that the eprom is loading its program at the power up of the machine so I need to know how to store the modifications in the eeprom i order to eliminate the necesity of modify the parameters each time a power loss ocurrs. I dont know How to "Burn" the eeptom I will appreciate your help
.thank you
Roy
