Pv550
- Thread starter gregi
- Start date
Clay B.
Lifetime Supporting Member
do you not have an else error condition?
Usually the culprit is that you have not assigned an display vale to the message. Since the PV550 doesnt have a display assigned to your values above 29 then it falls back to the else function.
Usually the culprit is that you have not assigned an display vale to the message. Since the PV550 doesnt have a display assigned to your values above 29 then it falls back to the else function.
Similar Topics
Is there a way to add a stop to the attached program? I want to stop it after the first rinse so the operator would have to push a button for it...
I'm trying to connect a PV550 (2711-T5A2L) to a 1761-NET-AIC using a 1747-C11 cable (w/RJ45 removed) and the Phoenix connector. Can someone tell...
We have an old machine that has been mothballed since early 2018 and management are looking at more work for it in 2022. The system runs on an SLC...
Trying to write a program for a PV550 (2711-T5A16L1, Ser. B, Rev. E, FRN 4.46) to test the touchscreen.
I wrote a program with 16 pages and on...
Good Morning Folks.
Win Xp, PRO, Version 2002, SP3
RSLinx Classic 2.54
Using the AB UIC-485 driver with the 1747-UIC and a 2711-NC13 connected...