In the project and system manager below, I am trying to find out where the data is actually sent to the press as far as distance and speed.
I have tried to trace it back but have hit a dead end.
In the MAIN prog Line 0068 there is a:
fbPress_MoveAbsolute(Execute:=StartPressing, Position:=Position1 , Velocity:=Velocity1 , Acceleration:=3000 , Deceleration:=1100 , Jerk:= 710, Axis:=Nc_Plc [1], Done=>PressMoveDone);
when you hover over fbPress_MoveAsolute it shows a popup with MC_MoveAbsolute.
I cannot find these items anywhere in the program or system manager. Any help or advice would be greatly appreciated.
Thanks,
-Joel
I have tried to trace it back but have hit a dead end.
In the MAIN prog Line 0068 there is a:
fbPress_MoveAbsolute(Execute:=StartPressing, Position:=Position1 , Velocity:=Velocity1 , Acceleration:=3000 , Deceleration:=1100 , Jerk:= 710, Axis:=Nc_Plc [1], Done=>PressMoveDone);
when you hover over fbPress_MoveAsolute it shows a popup with MC_MoveAbsolute.
I cannot find these items anywhere in the program or system manager. Any help or advice would be greatly appreciated.
Thanks,
-Joel