jtorres2_77
Member
Hello everyone. I am having trouble trying to find out what the dipswitch settings on a Modicon AS-BDAU-204 are for. The card is a 4 channel analog output card. If anyone can help me find a manual I would appreciate it.
Modicon as-bdau-204
- Thread starter jtorres2_77
- Start date
jtorres2_77
Member
OP
I have been forced to go back to this problem. Can anyone please help. I am getting a traffic error when i try to start the controller.
Patrick
Lifetime Supporting Member
I think if you hit F1 help. Then select I/O Card help.
Then A120 Series. Select the card you want or goto.
Or try this link.
http://v1.graybar.com/automation/ga_manuals/Hardware/TsxCompact/Ver%204.0/TOC_Index.pdf
I could not find a listing with the B but then this is not unusual for Modicon.
Pat
Then A120 Series. Select the card you want or goto.
Or try this link.
http://v1.graybar.com/automation/ga_manuals/Hardware/TsxCompact/Ver%204.0/TOC_Index.pdf
I could not find a listing with the B but then this is not unusual for Modicon.
Pat
Last edited:
jtorres2_77
Member
OP
Modicon
It is a modicon compact unit. The correct number is as-bdau-204, 4 channel analog output module.
It is a modicon compact unit. The correct number is as-bdau-204, 4 channel analog output module.
Patrick
Lifetime Supporting Member
This unit is listed in the modicon Catalog from January 1998 as AS-BDAU-204 voltage/current output. As far as i know this is the same modual as AS-DAU-204. This is used in the micro and the 984/A20 compact.
Pat
Pat
Patrick
Lifetime Supporting Member
jtorres2_77
Sorry for the bad link. I just checked it today and saw that it was not complete, my apology. Here is a link direct to Schneider Electric. Down load the first one.
http://www.global-download.schneide...C1256EDE0038AFB2C125709A00218F10?Opendocument
Sorry for the bad link. I just checked it today and saw that it was not complete, my apology. Here is a link direct to Schneider Electric. Down load the first one.
http://www.global-download.schneide...C1256EDE0038AFB2C125709A00218F10?Opendocument
Similar Topics
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Hello All,
Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
I have a 170AAO92100 card that I am interested in using as a 10 volt output. Is there setup that I have to do in order to change output or simply...
Hi,
Seeking consultation on an implementation matter, and have a question about Modicon Compact 984 communication through RS485:
Three Modicon...
After updating a panel, I inherited another PLC for my "learning lab". It's a Modicon TSX Micro. I've not worked with a Modicon PLC yet, so I...