RSLinx Saving remote Ethernet Network Browse list

aswilson

Member
A
Join Date
May 2007
Location
Harrisonburg,VA
Posts
18
We use RSLinx Classic Gateway for our AB PLC communications. The one issue we have is that even if you have your RSLinx configuration saved and backed-up in a .RSX file, the remote Ethernet browse lists IPs do not save. We notice this most on 1756-ENBTs, but is most likely true of most IP devices that support remote browse. We have several isolated 20-90 node networks and entering the IPs on every computer after we reload one is a pain. I was hoping I could save a file or something to save the remote browse list.

I know RSLinx Enterprise browses to ENET/IP devices automatically, but we don’t have it on most computers.

Thanks!!
 

Similar Topics

H
RSLinx Enterprise Topic in FTLD, weird behavior
I don't have a whole lot of experience with RSLinx Enterprise or I guess it's also called FactoryTalk Linx. We have a Rockwell FTView SE based...
Replies
0
Views
49
harryting
H
H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
80
dmroeder
dmroeder
P
RSLinx Classic Network Dropout
Hi, I am working on a project, where I face a issue with respected to Network Dropout. The PLC is connected to a 16 port unmanaged switch, where...
Replies
7
Views
230
TheWaterboy
TheWaterboy
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
276
LMDAVE
L
E
RSLinx Slow to Open
Anyone have issues with RSLinx being very slow to open. It sometimes will say "Checking Activation" at the bottom for what seems like an...
Replies
2
Views
194
eight_bools
E
Back
Top Bottom