lakmali Member L Join Date Aug 2009 Location colombo Posts 1 Aug 18, 2009 #1 what is actually the difference between protool and wincc???? im just anew comer to this field.
SNK Member S Join Date May 2004 Location Toronto, Ontario Posts 885 Aug 18, 2009 #2 Many answers! About 2Gigs of Space on your HD About 1 Gig of RAM WinCC is Way less User Friendly (Siemens would argue this point) WinCC slows down your PC, while Protool does not Siemens contract is required for WinCC....You will need it. TRUST ME!! Do you see where this is headed? My advice is.....stay away unless you have to! I had to walk away from a project due to inconsistencies with the software.... The panels are great though......Protool was awesome.
Many answers! About 2Gigs of Space on your HD About 1 Gig of RAM WinCC is Way less User Friendly (Siemens would argue this point) WinCC slows down your PC, while Protool does not Siemens contract is required for WinCC....You will need it. TRUST ME!! Do you see where this is headed? My advice is.....stay away unless you have to! I had to walk away from a project due to inconsistencies with the software.... The panels are great though......Protool was awesome.
jayc12155 Member J Join Date Aug 2009 Location Bangalore Posts 50 Aug 18, 2009 #3 Bingo SNK, I still feel protool easier than WinCC, Cause programming OP's and using PC as HMI (Runtime) is far more easier.
Bingo SNK, I still feel protool easier than WinCC, Cause programming OP's and using PC as HMI (Runtime) is far more easier.