tomwhite007_2008
Member
why does Beckhoff use the %(Percent Symbol) in there addressing?
Example:
MB_TT222 AT %QB142 :WORD; (*RO*)
Example:
MB_TT222 AT %QB142 :WORD; (*RO*)
why does Beckhoff use the %(Percent Symbol) in there addressing
- Thread starter tomwhite007_2008
- Start date
TurpoUrpo
Lifetime Supporting Member
Standard defines it.
That is the IEC-61131-3 standard.
LadderLogic
Member
It should be added that GE Fanuc has been using % symbol as an address designator as well.
Similar Topics
Any help for a Beckhoff PLC that does not start up correctly the first time? The system will lock up, stop responding at times, requiring me to...
Hi
I have a ifix 5.5 application where the operator opens a valve by clicking on a screen object. I can trace from object to data base that it is...
Hi,
i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
I am trying to connect with a Schneider plc which has a firmware version only available in Somachine v4.2. In Machine expert After taking upload...