PTC Connection for SIMOCODE

kcsraonv

Member
K
Join Date
Aug 2004
Location
Yanam- India
Posts
1
Hello eveery one, I want to know weather PTC cable from motor to MCC can be clubbed along with 110AC control cables or need a seperate cables ?

What precautions to be taken for PTC wiring?
KCSRAO
 

Similar Topics

S
Motor PTC Thermistor Connection to a PowerFlex525
Can someone explain how a Powerflex 525 drive interprets the PTC Thermistor signal from a motor winding? How does one know what the levels are or...
Replies
3
Views
4,023
jraef
J
J
PTC Kepware/ Linkmaster bad vartype
Hi, Have anyone came across issue with Kepware or Linkmaster not returning correct values (Unknown Quality) for some tags From OPC DA Client...
Replies
7
Views
674
Dale87
D
J
Built-In motor PTC with Siemens G120 VFD
Hello all, I am using a Sinamics G120 CP 240E-2 PN-F control unit to drive a Siemens 1LE10030DA222AB4 3-phase 1hp (0.75kW) motor. The motor has a...
Replies
3
Views
5,091
Jieve
J
P
PTC wiring in encoder cable
We want to use spare wires in the encoder cable to wire also the ptc of the motor. Only thing I am worried about is the voltage drop on the wires...
Replies
7
Views
3,202
BryanG
B
A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
12
Views
250
IO_Rack
IO_Rack
Back
Top Bottom