metwally.mustafa
Member
please help.......
how can i connect a high counter speed module with step7
in order to control a speed of a servo motor using PID function
and how can i know the module channels and dealing with these channels in
the program .
how can i set the fucntion parameter like:
SP_INT
PV_IN
PV_PER
GAIN
DISV
how can i connect a high counter speed module with step7
in order to control a speed of a servo motor using PID function
and how can i know the module channels and dealing with these channels in
the program .
how can i set the fucntion parameter like:
SP_INT
PV_IN
PV_PER
GAIN
DISV