wincc responce time high ......

altafjamadar

Member
A
Join Date
Feb 2010
Location
pune
Posts
29
Hi !
today we face a problem with wincc respoce time, it is high it takes time only first time & when we start a DC drive after it works normal . If we think it is because of harmonics , but last one year all the same system working ok.
please guide me .....

Thanks
Jamadar.
 

Similar Topics

B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
65
Jkoso
J
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
65
Plantationpark
P
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
145
mk42
M
A
Buttons Not Working in WinCC Unified
I am creating a project with WinCC Unified v16 Upd6 (PC runtime) with an S7-1200. The communication is good between the PC and the PLC as I can...
Replies
6
Views
194
drbitboy
drbitboy
C
How to Time Sync? S7-400H CPU (Time Master) With Wincc Runtime V7.5(Time Slaves)
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
54
Controller5848
C
Back
Top Bottom