RSLogix 5000 V18.00 and 1734 Point I/O

prtravis

Member
P
Join Date
Aug 2007
Location
Canonsburg, PA
Posts
4
I just upgraded RSLogix 5000 from v17.01 to v18.00. I am using some 1734 Point I/O with the project and much to my surprise, the 1734-IA4 and 1734-OA4 I/O I had configured in 17.01 cannot be changed in 18.00. Clicking on the properties of either module brings up a semi-blank window and chokes RSLogix. I am looking for the Generic Profile that was used prior to RSLogix 15.00 so I can take care of this problem. I can't wait for a solution from Rockwell.🔨
 

Similar Topics

E
Cognex dataman 280 barcode reader input to rslogix 5000
Hello, I am trying to read a barcode scanner input using a cognex dataman 280 barcode reader, store it another string, the compare with another...
Replies
1
Views
114
Emmabod
E
P
AB PLC, Rslogix 5000, alarm issue
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
2
Views
211
PLCbug123
P
A
Tank level rslogix 5000 program. I’ve got errors on rung 2,3,4. Do u see the problems? Also does my geq n les look right?
Replies
4
Views
244
drbitboy
drbitboy
A
Can u help me on a RSLogix 5000 program?
I am completely stuck on building a ladder program that requires a start button to be pressed 3 times to turn on motor 1. Then motor 2 starts...
2
Replies
20
Views
654
drbitboy
drbitboy
K
Can't see "verify rung" data in RSLogix 5000
First off, I'm a hobbyist-level programmer, and this program isn't controlling anything anything that could even remotely be considered "life...
2
Replies
18
Views
597
joseph_e2
J
Back
Top Bottom