Can we use PC ADAPTOR MPI 6ES7 972-0CB20-0XA0 which one we are using for s7-300 to down load S7-200. We are facing problem in down loading program more then 19.2KBS in PPI cable. Please any one help us regarding this and give brief procedure to increase baud rate in PPI cable.
CAN WE USE PC ADAPTOR USB FOR S7-300 to S7-200 for down loading
- Thread starter patil
- Start date
hello
if ur network is on ethernet
then best option
use NetlinkPro eth
it is easiest and reliable source and u can not find any difficulty in
i use Softings Netlink pro eth
it gives best result
if ur network is on ethernet
then best option
use NetlinkPro eth
it is easiest and reliable source and u can not find any difficulty in
i use Softings Netlink pro eth
it gives best result
Similar Topics
Good Evening ,
We have a few AB PLC-5 PLC's left . I took notice that we do not have and PCMCIA slots in our laptops . Do they make any...
I looked through the histroy for this and found very little.
I need to find a way to talk to a device net attached to a SLC5/05. This line was...
Has anyone connected their IDEC PLC with a usb-rs232 adaptor? Which adapters work and which don't?
Thanks
iam using serial adaptor to communicate with PLC.
whenever i do onlne changes the communication breakes .
can anybody suggest good ideas to solve...
Recently I am working with a USB adaptor in my laptop to stablish communication with Micrologix 1500 via serial port. Frecuently RSlogix lost...